Know what you're after?
Metroll Sydney  > Roofing & Cladding >  Trimclad«

Trimclad«

Requiring a pitch of only 2░, Trimclad® has the answer for longer spans. Used to Clad and Roof industrial buildings, homes, carports or patios.

Trimclad® is custom-length, high tensile steel roofing manufactured from .42mm and .48mm B.M.T. Colorbond® and Zincalume® or Galvanized® steel. It is also available as a wall cladding manufactured from .35mm B.M.T. Colorbond® and Zincalume® steel. Trimclad® is the most popular industrial roofing and cladding profile. It is also excellent for all residential uses.
 

SPECIFICATIONS

Metroll can supply Trimclad® sheeting up to a maximum length of 35 meters depending on availability of delivery. Lengths to be manufactured by Metroll should be site measurements, not those taken off plans.

Sheet length is obtained by measuring the distance from the ridges to external edges, or fascia and adding 50mm for overhang into gutter.


USAGE

For roofs with continuous sheets and no end laps the minimum roof pitch is 3║ (1 in 20). To prevent ponding from occurring this minimum pitch must be adhered to at all points of the roof. For roofs with end laps the minimum lap is 200mm for pitches between 3║ and 15║ and 150mm above 15║. For walls allow minimum end laps of 100mm. Prior to fixing, turn top end of sheet up and gutter ends down using the tool available from Metroll.

BENEFITS

  • Cost effective
  • Lightweight
  • Quality assured
  • Custom manufactured
  • Wide space
  • Market proven
  • Hi-Tensile steel
  • Variety of colours & accessories
  • Up to 35 metres long

TECHNICAL DETAILS

For further information and technical details, see the Trimclad® Fact Sheet.
 
 

Click here to download a Technical Diagram.