Know what you're after?
Metroll Sydney  > Roofing & Cladding >  Corodek®

Corodek®

Corodek® is the perfect choice for many situations, especially for domestic use. From roofing & cladding, to interior use, Corodek® is suited to almost any application.

Corodek® is custom-length, high tensile steel, corrugated roofing and wall cladding manufactured from .42mm and .48mm B.M.T. (Base Metal Thickness) Colorbond® and Zincalume®. Perfect for traditional residential designs as well as more modern finishes. Also useful in industrial applications. Suited for use as roofing and cladding as well as a variety of other uses including internal walling, ceilings and facades. It is also available for curved applications (see separate listing).


SPECIFICATIONS

Metroll can supply Corodek® Colorbond® or Zincalume® sheeting up to a maximum length of 15 meters depending on load limit regulations set by the relevant local transport authority. Lengths ordered to be manufactured by Metroll must be site measurements, not those taken off plans.

The required sheet length is obtained by measuring the distance from the ridges to external edges, or fascia and adding 50mm for overhang into gutter. Length tolerance on Corodek is ± 10mm.


USAGE

For roofs with continuous sheets and no end laps the minimum roof pitch is 5° (1 in 12). For roofs with pitches between 5° and 15° the minimum end lap length is 200mm and for pitches above 15° its is 150mm. For walls allow minimum end lap of 100mm.

Metroll can supply Corodek® sheeting up to a maximum length of 15 meters depending on availability of delivery. Lengths ordered to be manufactured by Metroll should be site measurements, not those taken off plans.

BENEFITS

  • Custom length
  • Hi-Tensile steel
  • Long length
  • Cost effective
  • Ideal for traditional & modern design
  • Multipurpose

TECHNICAL DETAILS

For more detailed information and technical details about Corodek, see the Corodek® Fact Sheet.